- Compact 12 volt DC water pump
- High pressure capacity
- Durable performance
- Low power consumption
- Submersible construction
|
- No rotor
- No ceramic shaft
- No bearing
- No impeller
- Low or no maintenance
|
 |
 |
| |
| Temperature Range (Liquid) |
-20°C ~ 80°C, recommended +10°C ~ 70°C |
| Storage Temperature |
-20°C ~ 80°C |
| Designed Flow |
400~500 ml/min |
| Designed Liquid Temperature |
60°C |
| Relative Humidity |
Can be lower than 85% |
| Acceptable fluids |
Water (H2O, distilled water), R-OH solution,
and other fluids on request |
| Inlet & Outlet Diameter |
7 mm OD, 4 mm ID |
| Pump Dimension |
14.5 mm D x 64 mm L |
| Maximum Head / Pressure |
4 m, 40 kPa |
| Rated Voltage |
12 VDC |
| Voltage Range |
7 ~ 13 VDC |
| Minimum Driving Current |
120 mA (loaded) |
| Operating Frequency |
70 Hz ± 15% |
| Nominal Power |
4W ± 10% |
| Noise Level |
30 dB ± 15% |
| Weight |
< 30 g, < 1 oz |
| Operating Life |
44,000+ hours |
| Drive Signal |
PWM |
| Motor Type |
Carbon brushless, micro-reciprocating motor |
| Installation |
Inline and/or submersible |
| Orientation |
Any angle, preferably horizontal |
| Protection |
Clog and thermal protected |
| Compliance |
UL 60950, Standard for Information Technology Equipment |
|
|
For OEM use, customization is available, please contact us for
more information.
|
|
